This is a good picture of the head stock (outboard shown towards the camera) of the 1942 Dunlap lathe that I refurbished and now is in working order.
Seen here is the improvised tool rest that I made to turn wood (I used it in absence of the real one. I was using the langer spindle tool rest but It was too big.)
This is a picture of the bottom of the poplar and maple bowl I made. The bottom was made with my homemade CompressionChuck.
This Is a top view of the same bowl. The two top layers were laminated maple that was very ugly. I attached the blank to a ScrewChuck by the top of the bowl, and procedded to turn the bowl at slow speeds with a roughing gouge until the bowl was close to round on the outside.
Front Page
Comments (0)
You don't have permission to comment on this page.